Product Accessories
SEC 3500 HMI OPERATOR INTERFACE
The SEC 3500 HMI is an operator interface dedicated to communicating to the SEC 3100 gas detectors, SEC 4855 Relay Controllers, SEC DAIM units.
SEC 4850 REPEATER
A data highway booster used to increase
the capabilities of the Sensor Electronics
data highway.
SEC DUCT MOUNT
ADAPTER
Used for mounting SEC Gas Sensors to air
handling, heating, ventilation and air
conditioning duct work.
SEC CALIBRATION
KIT
The SEC Calibration Kit is used for routine
maintenance of the SEC Gas Detectors.
SEC 2500 HAND
HELD PROGRAMMER
The SEC 2500 Hand Held Programmer transmits
and receives infrared light which is used
to communicate with any SEC 2000 that
is equipped with a display module. The
devices can be checked, calibrated and
information can be correlated with a touch
of the keypad.
IR PC LINK SOFTWARE
PC Link Software is used in conjunction
with the Signature Series Gas Analyzers
and the SEC Millenium Infrared Gas Detectors.
MEMORY CARD READER
The SEC Memory Card Reader is designed to extract data log information from the memory card installed on the SEC 3100 Universal Transmitter and the SEC 3100 DIN Transmitter. The information from the memory card can be downloaded to a computer hard drive in a useable format to generate graphs and reports.
SEC 3100 LOGIC INTERFACE MODULE “LIM”
The SEC Logic Interface Module “LIM” interfaces non-SEC devices to a Modbus network through the SEC 3100 Universal Transmitter. Device names are displayed on the SEC 3100. The LIM accepts low and high alarm input contact closures.
SEC 3100 ANALOG INTERFACE MODULE “AIM”
The SEC Analog Interface Module “AIM” interfaces non-SEC 4-20mA devices to the Modbus network through the SEC 3100 Universal Transmitter. Device names are displayed on the SEC 3100. The AIM accepts an analog 4-20mA input signal.
SEC 3500 RELAY CONTROLLER
The SEC 3500 relay controller is used with the SEC 3500 Operator Interface via the Modbus RS-485 network. There are 8 or 16 addressable modules available. Alarm relays can be used to actuate alarm and devices control.
SEC 3100 ISO REPEATER
The SEC 3100 ISO Repeater extends the distance and increases the number of devices to the RS-485 network. There is an isolated (1500 volt) bidirectional data flow between the Repeater and other devices on the RS-485 network. |
