| |
SEC 2500 Hand Held Programmer
The SEC 2500 Hand Held Programmer transmits
and receives infrared light from the front
of the housing. The infrared light is used to
establish non-intrusive communication
with any SEC 2000
that is equipped with a display module. When
communicating with the SEC
2000, the SEC 2500 must
be pointed directly at the display module
of the SEC 2000
which can be up to 15 feet away.
The SEC 2500 Hand Held Programmer can
communicate with any SEC
2000 Gas Detector on the same RS-485 network once infrared communication
is established. Data exchange, using the
infrared link, occurs at a rate of 300 baud.
The programmer has a socket at the bottom
of the unit for connecting to a Data Communication
Cable (P/N 147-1000C). The Data Communication
Cable enables a hardwire communication
connection to all SEC devices.
Once communication is established, the
devices can be checked, calibrated and
information can be correlated with a touch of the keypad
located on the SEC 2500 Hand Held Programmer.
The SEC 2500 Hand Held Programmer is certified
for use in hazardous areas.
SEC 2500 Hand Held Programmer Features
| • |
CSA/NRTL
Approved |
| • |
Used
for non-intrusive configuration
and calibration of SEC
2000 Gas Detectors |
| • |
Calibrates,
checks and correlates data from
any SEC detector
on the data highway |
| • |
Bi-directional
infrared communication when
pointed at any SEC 2000 display board |
| • |
Intrinsically
safe menu driven device |
| • |
Can
communicate with SEC
1500, SEC
2000 and SEC
DAIM devices |
|
|
|
SEC 2500 Hand Held Programmer Specifications
| APPROVAL |
|
CSA
file # LR95495-2 |
 |
| BATTERY
LIFE |
|
Approximately
25 hours |
|
| CONTROLS |
|
Membrane
keypad |
|
| DATA
COMMUNICATION INTERFACES |
|
RS-485
wired connection
Direct plug connection
Infrared |
|
| DATA
EXCHANGE RATE |
|
RS-485:
9600 baud
Direct: 300 baud
Infrared: 300 baud |
|
| DIMENSIONS |
|
8.25"
(L) x 4" (W) x 2" (D) inches
210 (L) x 100 (W) 55 (D) mm |
|
| DISPLAY |
|
16
x 2 line alpha-numeric LCD display |
|
| MAIN
MENU CHOICES |
|
Date
exchange, configurations, relay programming,
manual relay control, calibration,
sensor synopsis, reset relays, lamp
test, edit today's date |
|
| OPERATING
TEMPERATURE |
|
32º-158º
F, 0º-70º C |
|
| POWER
SOURCE |
|
"AA"
alkaline batteries (4 required) |
|
| WEIGHT |
|
Approximately
14 ounces with batteries (400 grams) |
|
|
