SEC 2000 DIN Digital Gas Controller

The SEC 2000 DIN provides interface capabilities for the SEC 3000 Toxic & Oxygen Gas Detector and SEC Millenium Infrared Gas Detectors.

The SEC 2000 DIN features:

Segmented LED display for Gas Level/Unit Parameter display.
Four (4) configurable Alarm/Fault Relays.
An isolated RS485 interface provides reliable communication in noisy environments and eliminates “Ground Loop” problems.
Pushbutton switch for local configuration and calibration.
Analog 4-20 mA output.
Detachable connectors facilitate quick and easy field-wiring installation.

Features

•	DIN rail or panel mounted controller
•	LED display
•	Compact and low cost
•	Self-check system
•	4-20 mA output
•	Isolated RS-485 interface
•	Alarm and fault relays
•	Non-intrusive pushbutton calibration
•	Compativle with SEC 3000 and SEC Millenium Gas Detectors

DETECTION METHOD		Toxic Gases — Electrochemical Combustible and CO2 — Infrared

DISPLAY		Four (4) 7 segment LED Four (4) LEDs for relay indication

GAS SENSOR COMPATIBILITY		Toxic Gases — SEC 3000 Combustible and CO2 — SEC Millenium

HOUSING CONSTRUCTION		ABS plastic (enclosure color gray)

HOUSING DIMENSIONS		3.54 (W) x 4.17 (L) x 2.28 (H) inches 90 (W) x 106 (L) x 58 (H) mm

HUMIDITY		0-99% RH (non-condensing)

OPERATING CURRENT (no sensor)		125 mA maximum at 24 VDC

OPERATING VOLTAGE		18-32 VDC

OUTPUT (analog)		4-20 mA (source type), maximum 1,000 ohm load at 24 VDC supply voltage

OUTPUT (digital)		RS-485 isolated

OUTPUT (relays)		(3) Alarm and (1) Fault

POWER CONSUMPTION (SEC 2000 DIN and sensor)		Toxic gases and oxygen (SEC 3000) – 4W maximum Combustible and CO2 (SEC Millenium) – 9W maximum

TEMPERATURE RATING		-40° to +70° C

WEIGHT		Approximately 2 lbs. (0.9 Kg.)